| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Neck woods http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=7928 |
Page 1 of 1 |
| Author: | Jimmy Caldwell [ Wed Aug 09, 2006 6:34 am ] |
| Post subject: | |
Anyone know of a source for curly Honduran Mahogany one-piece neck blanks? |
|
| Author: | Brock Poling [ Wed Aug 09, 2006 6:37 am ] |
| Post subject: | |
Gilmer? |
|
| Author: | Dave Rector [ Wed Aug 09, 2006 6:46 am ] |
| Post subject: | |
You might give Steve @ Colonial a call. He told me he had gone to look at some BRW (turned out to be Honduran RW) and the guy had a bunch of Honduran Mahogany. Not sure if Steve bought it all or if any of it is curly, but it's worth a shot. |
|
| Author: | rich altieri [ Wed Aug 09, 2006 2:48 pm ] |
| Post subject: | |
Might also check with Bob Cefalu at rctonewoods.com I just ordered a blank from him. He has a good variety and will make whatever you want |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|